Conservation of utilities can help you reduce not only your carbon footprint but also your bills. The scope for conserving utilities in an average home is enormous. That is why the question which people often have when it comes to conserving them is, where should we start?

The best place to start is the one where there is most wastage. We are speaking about the bathroom. Once you follow a few simple tips, you can reduce your water and energy consumption in the bathroom. It will ensure that you can save a significant amount of money.

Today we will share 8 different ways in which you can save water and energy in your bathroom. The tips which we are going to highlight are relatively easy to follow and will help you save water and energy right from day one.

Want to reduce your carbon footprint as well as your bills? Here are 8 different ways to can save water and energy in your bathroom and save money as well.

Click To Tweet

1. Install a Water-Saving Showerhead

The first culprit in our bathroom, which wastes a lot of water, is the showerhead. We often do not think about water consumption while using the shower. However, if you choose one which automatically consumes less water, you can do your bit to save water. You might ask, where can we find such a showerhead?

There are plenty of options to research online. You can visit HomeGearX to find your suitable low flow shower heads. Since these consume less water, you will not have to modify any of your habits to conserve water. They will automatically help you save water.

2. Take Cold Showers

The water heater can consume a lot of electricity. We usually keep it on throughout the shower. The fact that an average shower bath can easily last for 15 to 20 minutes, you can end up consuming a significant amount of electricity. The best way to reduce this electricity consumption is to take cold showers whenever the weather permits.

It means that you can reduce your bathroom electricity consumption by at least 20% annually. It will not only help you do your bit for the environment but also reduce your utility expenses.

Image Source: https://westcoastsanitationinc.com

3. Install Low Flow Toilet

Another culprit in your bathroom is the toilet. The regular toilets can consume anywhere in the range of 1.6 to 2 gallons of water per flush. However, when you choose a low flow toilet, you can bring this down to 1 to 1.25 gallons per flush. As a result, you will be able to reduce water consumption by at least 25%.

Hence; it is a good idea to go with the low flow flushing toilet design. It does not compromise on the water pressure or hygiene. Without compromising on efficiency, you can save 25% of water. The water savings will ensure that the low flow toilet pays for itself in a short time. Considering these factors, it is a win-win situation.

4. Turn Off the Water While Brushing

The next tip on our list is pretty basic. However, it can help you save unnecessary wastage of water. Most of us have the habit of keeping the tap open while brushing. However, the water that we need is minimal.

We need water only while gargling or washing our mouth or the brush. That is why; keeping the tap closed during brushing and unless you need it will save you at least 100 gallons of water per month if you’re a family of 4. Therefore, this step is a no-brainer.

5. Use LED Lighting

The LED lighting can help you save 20% on electricity costs. The fact that the level of illumination in LED lights is generally higher, you can illuminate your bathroom easily. Moreover, the LED bulbs can last for years together. It means that you will not have to worry about replacing them or maintaining them again and again.

It will not only help you reduce electricity consumption but also maintenance and repair cost. The LED lighting is a hassle-free experience, which is why you should incorporate it into your bathroom.

6. Turn Off the Exhaust Fan

Usually, we keep the exhaust fans ON after our bath. It is a good 25 to 30 minutes before we switch them off. However, exhaust fans can do their bit in just 10 minutes after your bath. Due to this very reason, it is better to turn them off after that time.

When it comes to electricity consumption in your bathroom, every unit counts. That is why; this simple step can bring down the electricity consumption of your bathroom by at least 5%.

7. Decrease the Water Heater Temperature

Most modern water heaters allow you to set the temperature to which you want to heat the water. It means that you can easily customize the water output. The lower the temperature, the lesser will be the electricity consumption. Instead of keeping the temperature high unnecessarily, you should keep it at a lower level.

As a rule of thumb, reduction in every 10F will save you 4% to 5% in electricity consumption. It is a good idea to keep it lower than 120F. This temperate will ensure that you can have a comfortable bath and also save electricity.

8. Get the Leaks and Dripping Faucets Fixed

The best way to curtail water consumption in your bathroom is to repair the leaks. Most of us do not pay attention to the leaking faucets or leaking pipes.

Since our bathrooms consist of proper drainage mechanisms, the leaking water does not impact us directly. It is one of the main reasons why people do not get these fixed. However, even though they might not bother you but certainly increase water consumption.

That is why the simplest way to reduce the water consumption in your bathroom is to get the leaks and the dripping faucets fixed.

It might seem like saving water and electricity in your bathroom is a bit difficult. When you look at it closely, there are plenty of ways in which you can do so. You can start with our guide above to reduce the utility consumption in your bathroom.

The tips which we have highlighted above are easy to follow. You can implement most of them in just a couple of weeks. It means that if you take action now, you can reduce the utility expenses from the next month. So, if you’re struggling with water and energy consumption, the bathroom is the best place to start.